- #Owc macbook air mid 2013 ssd upgrade install
- #Owc macbook air mid 2013 ssd upgrade upgrade
- #Owc macbook air mid 2013 ssd upgrade pro
- #Owc macbook air mid 2013 ssd upgrade mac
That means that not only is it a fast drive in a general sense, but it makes it easy to transfer your original data back to your Mac if you desire to do so.
#Owc macbook air mid 2013 ssd upgrade pro
The Envoy Pro ships with a USB cable, and features the high transfer speeds afforded by USB 3. It was just a matter of sliding the old SSD into the slot inside of the Envoy Pro, and screwing on the cover. Installation of the stock drive into the Envoy Pro, like the primary installation, was extremely easy.
#Owc macbook air mid 2013 ssd upgrade upgrade
I like the idea of getting the SSD Upgrade package, because it makes it easy to ensure that all of your data from you Mac is backed up, and it means that you can still use the drive that you removed from your Mac. This drive enclosure allows you to repurpose the stock SSD that you removed from your MacBook upon upgrade. If you opted for the SSD Upgrade package, you’ll also receive an Envoy Pro drive enclosure. If you don’t have a USB startup disk, you can always go the Internet Recovery route by holding ⌘+R on boot.
#Owc macbook air mid 2013 ssd upgrade install
That’s it.Īfter installation, it was then just a matter of using my handy OS X El Capitan USB startup disk to install OS X. After removing the sticker from the Aura’s thermal pad, I installed the new SSD, screwed it back down, connected the battery, and replaced the back cover. Once the bottom cover was removed, I disconnected the battery connector, unscrewed the single screw for the stock SSD, and removed the stock SSD. Other than that, the upgrade was a cinch. Also, the two screws nearest the hinge are shorter than the other eight screws, so be sure to keep those separate from the rest as you remove them. Be sure to apply enough downward pressure on the screws as you turn the screwdriver to make sure you don’t strip the screws. Some of the cover’s 10 pentalobe screws were a little tight. The hardest part of the whole installation was removing the bottom cover of the MacBook Pro. When it was all said and done, I had my new SSD installed in less than 15 minutes. This is helped by OWC’s handy step-by-step videos, which guide you through the entire install process. The actual upgrade process couldn’t have been easier. The package includes two types of Torx screwdrivers, the Aura flash storage unit, and the Envoy Pro needed to repurpose the old stock SSD. If you opt for the drive-only, you can purchase the tools separately for only $5.00. When you buy the Upgrade Kit, OWC ensures that all of the tools necessary to perform the upgrade are bundled with the Aura PCIe flash storage unit. The point is, there are many ways to backup and recover your data, you just have to choose the solution that you’re most comfortable using. When using the Envoy Pro, you can simply move your data back over to your new flash drive once the upgrade is completed. Placing the Aura inside of the Envoy Pro may damage both the drive and the enclosure. Keep in mind that only the stock SSD that you remove from your Mac works with the Envoy Pro.
If you opted for OWC’s SSD Upgrade Kit, you get an Envoy Pro drive enclosure, which lets you repurpose the stock SSD that’s removed from your MacBook upon upgrade, and all the tools (screwdrivers) needed to complete the job.
You can do this by using Time Machine or an external drive. The first thing that you should do prior to upgrading your MacBook is to backup all of your files.